The epoxy floor of factory building generally requires anti-skid, wear-resistant, compressive and easy cleaning characteristics, so the epoxy floor is the most suitable choice. The suitable construction technology is selected according to the ground condition of the workshop. Epoxy thin coated floor, epoxy mortar floor, epoxy self-leveling floor, etc. Ground condition is poor, generally choose 2.0 mm epoxy mortar floor or 3.0 mm epoxy mortar floor; choose epoxy self-leveling is also feasible, but the cost is slightly high, but the effect is beautiful, compressive and wear resistance is the best, and the service life is long. The ground condition is better, the new ground, generally the simpler process is thin coated floor and mortar floor. Because forklift cattle are often used, it is recommended to apply varnish after surface painting, so as to resist scratches and not easy to damage the floor paint.
Brushing method of epoxy floor paint:
The ground is polished and cleaned.
(2) Paint a high-efficiency epoxy primer, the paint should be sufficient, completely sealed;
(3) Scraping solventless coated mortar, (this process can also not be used, if used will enhance the hardness of the floor and service life)
Fourthly, scrape and coat epoxy putty in two ways.
(5) Brush the epoxy finish twice.
_Brushing varnish (this process is optional)本站網址：http://www.www.jatrabd.com