When skilled workers work on epoxy floors, we look easy, but really want to do a good job on the floor, is not an easy thing. How to make high-quality epoxy floor? This article will analyze from the following aspects. When we did these points, the quality of the epoxy floor was well controlled. From the construction method to construction tools, as well as floor materials, these aspects are well controlled in order to give customers satisfaction with the epoxy floor project.
1. grass-roots level. A good base is the basic condition for a good epoxy floor, because the quality of the base directly affects the above epoxy floor. Not long ago, a factory in Shanghai had unsatisfactory vegetable land conditions. The cement floor was badly sanded, rough, uneven and had no light. We had to let the customer pour another layer of concrete, and the construction of epoxy floors on the plain requirements to inform customers. Therefore, in the construction of the primer, the need for professional engineering managers to guide the construction, in order to avoid the base effect is not good, resulting in poor coating effect of epoxy floor paint. 2.材料。目前市場上環氧地坪材料參差不齊，有的公司生產出來的地坪材料雖然便宜，但是氣味很大，就是因為添加了低廉的添加劑，所以對地坪材料必須嚴格檢查、配置，所有進場材料都要進行檢測，杜絕不合格產品的使用。
2. material. At present, the market of epoxy floor materials is uneven, some companies produce floor materials although cheap, but the smell is very big, because of the addition of low-cost additives, so the floor materials must be strictly inspected, configuration, all entry materials must be tested, to eliminate the use of unqualified products.
3. tools. In the construction, in addition to floor materials, is the construction tool, must use high-quality rollers, spray guns, paint brushes, paper and other tools and auxiliary equipment, some poor quality rollers will shed, in the construction process will fall into the floor, seriously affecting the beauty of the ground. So we should avoid quality problems caused by poor tools.
4. people. Our company's construction personnel have more than two years of on-site construction experience, so it is necessary to carry out on-the-job technical training for all construction personnel, each construction personnel should be familiar with the epoxy floor construction process of the technical indicators and construction methods, never allow blind construction. Especially when the top coat is constructed, there must be more than three years working experience.
5. management. Before the construction, we must communicate with other construction units on the site, must cooperate with the general contractor and each sub-contractor well in the construction, must be strict on-site management of floor paint builders and clear on-site management system. And the quality of site construction personnel is also very important, they must be clear about the progress of construction, and according to the expected progress to complete the project.本站網址：http://www.www.jatrabd.com